Your Shopping Cart
Loading...

Directions

Getting here is pretty easy, we're right off I-93 and located right next to the TD Garden.  If you've been to the TD Garden, the North End or Beacon Hill this is gonna be easy.

Wondering where to park?

If you’re hoping to snag a spot out in front of the store, Canal street has 2 hour metered street parking, the availability of which can be a bit random and depend on the time of day. Streets running parallel to Canal, like Portland and Beverly also have metered street parking. You can pay in-person or on the ParkBoston app. 

If you strike out finding a street spot or just want to avoid the hunt altogether, you can always head over to the Haymarket Garage, the entrance of which is located a couple blocks away on Sudbury street. This garage is sweet, because if you dip into the Boston Public Market or Adam’s Convenience and buy something small, they can validate your parking and then it’s a dollar per hour for a maximum of 3 hours.

Just a heads up!

We are a couple blocks from TD Garden, so it definitely wouldn’t hurt giving their event schedule a look and allotting enough time for traffic and parking!

 

Boston Location & Hours

60 Canal St.
Boston, MA 02114
617.227.7770

 

 

Services

  • Sidas Custom Footbeds $220
  • Sidas Custom Footbeds

    These are the best custom footbeds we have found and used, goal of creating a custom insert that provides support and enhances the fit and precision of the boot. Assess the foot, prep the mold, heat the blank, create the footbed, trim, fit, finish. Roughly 45 minutes.

  • Liner Mold $60
  • Liner Mold

    Assess feet, pad feet where necessary, heat up liners to moldable temp, mold to feet and legs. Roughly 30 minutes.

    *Most effective on new boots.

  • Custom Boot Work (60 Minutes) $120 / hour
  • Custom Boot Work (60 Minutes)

    Shell punches, stretching plastic, grinding shells, liner work, boot board work, basic repairs. Custom boot work is complimentary when you purchase your boots from us. We will gladly work on boots purchased from another retailer during a custom boot work appointment for a fee.

  • Flat Ski Mount $60
  • Flat Ski Mount

    Determine mounting point based on skier preference, set jig, drill the ski, glue holes, mount bindings, set forward pressure based on boot, adjust DIN’s, test bindings, wax. (Yes, we mount Alpine Touring Bindings; Dynafit, ATK, G3, Cast System, Fritschi etc.)

  • System Ski Mount $40
  • System Ski Mount

    Install binding on track, adjust binding to sole length of ski boot, set forward pressure based on boot, adjust DIN’s, test bindings, wax.

    *This is for skis with an integrated binding that doesn’t require holes to be drilled.

  • Re-Mount $70
  • Re-Mount

    Remove old bindings, plug holes, determine mounting point based on skier preference and integrity of the ski, set jig, drill the ski, glue holes, mount bindings, set forward pressure based on boot, adjust DIN’s, test bindings, wax.

  • Binding Adjustment $35
  • Binding Adjustment

    Set forward pressure of bindings based on boot, adjust DIN’s, test bindings, wax.

  • Snowboard Mount $40
  • Snowboard Mount

    Determine rider stance (regular or goofy), adjust angles based on rider ability and preference, mount bindings, adjust binding straps to boot, wax.

Ski & Snowboard Tuning

  • Just Wax $20
  • Just Wax

    Wax and brush your skis or snowboard. Wax helps to improve glide and protect the bottom from base burn. Waxing frequently will reduce the need to get your gear ground flat, increasing the life of your equipment.

  • Classic Tune $60
  • Classic Tune

    Stone grind bases flat, add appropriate structure, belt sharpen side edges and set correct bevel based on preference, stone sharpen base edges to correct bevel and remove burrs, wax and buff bases.

  • The Works Tune $90
  • The Works Tune

    P-Tex bases where needed, belt grind away extra P-Tex, stone grind bases flat, add enhanced base structure based on snow specific conditions, belt sharpen side edges and set correct bevel based on preference, stone sharpen base edges to correct bevel and remove burrs, wax and buff bases.

  • One Week Storage $20
  • One Week Storage

    We complete all service during your appointment slot. If you can’t wait the 20-30 minutes you can leave them for an additional fee of $20 dollars per setup per week. 2 skis = $40 5 = $100.

Repairs

  • P-Tex $20
  • P-Tex

    Price Varies - Clean the damaged area, melt p-tex base material into the void, scrape and grind flat. Always accompanied by a tune. P-Tex is used for minor gouges that do not reach the core.

  • Core Shot/Base Weld $30
  • Core Shot/Base Weld

    Starts at $30 - Adding back material to the base when the ski hits a rock or other hard object. Always accompanied by a tune. Baseweld is used for major gouges that expose the core of the ski.

  • Epoxy $20
  • Epoxy

    Starts at $20 - Used to fix damage such as delaminations and top sheet chips. We used flexible marine grade epoxy to glue layers back together and seal out water.

XML Sitemap